Tyre Cutting Machine In UAE

 

 

Tyre Cutting Machine

 

 

 

 

 

What is Tyre Cutting Machine ? 

     Tyre Cutting machine is Typically Used to cut the wasted tires that are no longer suitable for use on vehicles due to wear or irreparable damage.

Tires are a challenging source of waste, due to the large volume produced, the durability of the tires are ecologically problematic. So we should recycle the tires. The tire cutting machine is main part to tire recycling process  . There is many type  of tire cutting machine is available to cut the tires.But the above machine cut the side wall of the tire and makes three pieces.It is easy to work and less maintenance  If we want to Store the large quantity of wasted tires in the small spaces, the machine is useful to reduce the size of the tires. The machine is cut the Truck tires. The machine is basically designed for the cut the truck tires. The carbon cutting tool is used to cut the tires. The tool is cutting around 500 tires. And cutting blade is specially designed for this machine. The blade of the tire is placed stably and tire is rotating. There are two types are used to rotating the tires to cutting purpose one is gearing box system and the another one is pulley system.Basically 7.5 hp motor is enough to cut the truck tires.This machine is very easy to operate and this machine runs fast.  We have more time and economy left when we do this machine than we do with the work people

 

 

 

Where is use the wasted tires

Although tires are usually burnt, not recycled, efforts are continuing to find value. Tires can be reclaimed into, among other things, the hot melt. Old tires can be used as an alternative fuel in the manufacturing of cement, a key ingredient in concrete. Whole tires are commonly introduced into cement kilns, by rolling them into the upper end of a Preheater kiln, or by dropping them through a slot midway along a long wet kiln. In either case, the high gas temperatures (1000–1200 °C) cause almost instantaneous, complete and smokeless combustion of the tire. Alternatively, tires are chopped into 5–10 mm chips, in which form they can be injected into a pre calciner combustion chamber. Some iron input is required in manufacturing cement, so the iron content of steel-belted tires is beneficial to the process.

 

for Inquiry Contact : thiqahcontracting@gmail.com